So, I’ve been much more productive these last couple of months than usual. Part of it’s getting on the right meds for a change, part of it’s completing the better part of a year’s worth of therapy for my ADHD. Now I’ve got time to work on something other than fixing my headspace, I’ve been working my ass off on my project backlogs. It hasn’t really made it onto the blog, since a lot of my projects have just been aimed at unfucking my house or otherwise not hobby-related, and I haven’t been in the mood to write for a while either. But now it’s too hot for carpentry, so back to the keyboard we go.
Right now I’m working on my massive post queue; I kept starting posts and then abandoning them to the ether after twenty minutes over the last year or so, and now I’m going back and finishing them – or adding on the stuff that I quit writing to do and never got done.
This is one of those posts – a selection of the ‘Mechs I converted/prepped/repaired in the course of three days back in June. I had to pull a couple back for QC (like the Bounty Hunter), but it was a lot of fun.
Left to right, front to back:
Front row: SHD-2D “Vang” custom Shadow Hawk (This one is a little surprise for the mission “Leave No Survivors“; check below the break for the tech readout. It’s a beast), Stinger, Crusader, converted GRF-1S “Steiner”.
Second Row: Stinger, converted Wasp (left-handed, with a Recon Camera, two Vehicular Grenade Launchers, and a Small Laser replacing the missile system), an ICE Thunderbolt (modified from Steve’s design in 3063, see below the cut), a dressed-up Griffin with a Dougram Bushmaster’s linear gun, and a stock WHM-6R for the Santander Killers.
Third Row: two stock Wolverines, plus a Shadow Hawk converted to a Wolverine standard. See below for the parts breakdown. After that there’s another upgunned Griffin and a reposed and cut-down Stalker for the pirates (I’m using the stats for the lightened 80-tonner with it).
Here’s some slightly better shots of the four who do me proudest.
SHD-2D “Vang”: Added another Dougram light Linear gun (the ML on the Shadow Hawk) from my gashapon collection, and put on a light SRM from the same source. The over-the-shoulder gun is the Large Laser I took from the Thunderbolt, mounted on a small part from a MW Clix mini. I recarved the area next to the head to remove the original grenade pack and plugged the SRM holes in its “collarbone”.
SHD-2 “NISE* Wolverine”: So, I’ve always disliked the way the Wolverine looks (heresy, I know. Shut up.). I scored a 3e plastic Shad on Ebay for $1 since the backpack gun was damaged and the laser had broken off. And I figured “Why the hell not? Someone’s gotta get a Command ‘Mech out of this, and pirates seem like the folks to do it”. First I rebarreled the arm laser with a bit of wire and some Green Stuff, then added a spare Command Destroid pack to the back in place of the AC. I mated the AC receiver to a barrel cut from scrap from a WH40 Basilisk fighting platform railing and a short magazine made from plasticard, then mounted it under the fore-arm. It’s hard to see, but there’s a small finger guard attached to the hand-grip. The missile rack is a carefully re-cut pair of SRMs from a JES-1 carrier. I also filed off the VGL mount on this one, but left the gap clear for the backpack SRM to shoot through.
This is going to be the leader for Recce lance of 2 Coy, Santander’s Killers.
*From the Gundam fandom. Refers to a “mocked up” or faked version of a ‘Mech using another’s chassis; the original NISE Gundam used a GM chassis.
TDR-6FX1: I like diesel Thuds. You like Diesel Thuds. We all like ’em. So this was an easy rebuild choice for another E-Bay rescue Thud. The shoulder mount is a pair of Dougram Linear guns, cut down and reinforced, with a Locust-like arm pod made from plasticard and a plastic rod. The arm got a Wolverine hand-gun from a WVR-6M conversion I did ages ago for a buyer, plus a shield from an MS-06F Zaku II that I had converted to a Zaku I. The smokestacks are made from sprues, and I sculpted a simple engine and heat sink into the back (as well as the laser pack space in the front). Given that these things are supposed to be like forty years old by the late Jihad, I busted her up a little bit too.
GRF-1S: This is a simple up-gunning, using components from a Roundfacer “Korchima Special” as well as a RRPGT Defender radome and some cord.First I cut away the shitter guns that come with the vinyl 3e minis, then carefully sawed in the detail on the legs and re-carved/sculpted the shoulder and side of the head. I added a small “reactor pack” on the back using a casting taken from a AAA battery, and wired it up to a recast Roundfacer gun. I tried a couple different components to dress up the other side of the pack, but the radome just seemed to fit so well. On the other side, I’ve mounted a smaller missile launcher, taken from a Dougram gashapon. Oddly, given how much time and effort I sunk into the others this one is still my favorite-looking.
Painting to come once I finish allocating to the various forces in the book, though I already have homes for the Stalker, “NISE” Wolverine (both to the Killers), Thud (Canopian militia), Stingers, Vang’s SHD (Draconis March Militia), and Griffins (One each to the Donegal Guards, Killers, and Black Widows). On the shelf I’ve got some converted Archers, Pixies, the Bounty Hunter (3015), a few Valks, and the Dougram gashapon to fiddle with, plus a fuckton of vees.
Below the cut, with some quick commentary on the design process and ideas behind them.